Depending on where you plan on diving, chances are that you will wear a wetsuit or, in some cases, even a dry suit. Both increase your wrist size substantially, which is why a dive watch usually features a deployant clasp with a divers’ extension, or even comes with an extra strap piece that can be attached to the strap buckle when worn over a dry suit (e.g. the unique Citizen Promaster 1000, which has been previously reviewed by WatchTime). A regular clasp extension usually doesn’t add enough length in those instances.
Now, regardless of whether you are a “strap person” or “bracelet person,” both options have their advantages and disadvantages: the deeper you dive, the more pressure your body and suit will experience. Which basically means that a neoprene suit that starts out being very tight suddenly becomes loose — and with it, your dive watch. An easily adjustable clasp extension, such as that offered with the Seiko Marinemaster, or the rather complex clasp of the Rolex Sea-Dweller Deepsea could be the answer to that problem (at least for wetsuits), but I have rarely witnessed a diver constantly adjusting his or her watch manually when diving.
Traditional ridges, used as a more flexible element for straps (as were introduced on many Seiko dive watches in the late ’60s/early ’70s), are therefore not only much cheaper to produce, but theoretically also better suited for automatically compensating for the effects of pressure at different depths. This is also why a large number of today’s dive instruments are still equipped with these iconic style elements. There is a disadvantage tom them, however: the more robust a rubber strap has to be, the stiffer it normally is and thus less flexible (which is why the ultra-robust Citizen could have easily done without the ridges). This is as it should be, because no one should fear losing a luxury watch over something as preventable as a broken strap.
The solution? A combination of both: early Doxa Subs, for example, featured a spring-loaded bracelet element. The first Omega Seamaster Ploprof had a very soft (and thus flexible) rubber strap piece as an extension for the watch’s mesh bracelet. More recently, in 2012, Tudor introduced with its Tudor Pelagos not only one of the most interesting dive watches available, but most likely also the best of all worlds in terms of divers’ extensions: a robust titanium bracelet with a traditional divers’ extension that additionally incorporates a flexible spring loaded element that automatically adjusts the bracelet. Tudor’s video for the watch (below) shows you how it works.
Ideal, right? Unless you’re diving with a dry suit, of course…
This article was originally published in 2014 and has been updated.
If you’d like to know more about dive watches, download our “Dive Watch Timeline” from the Watchtime Shop!